Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Paradise Homeowners
A new gate is a big purchase, and the install is where most of the value is won or lost. Posts set to the wrong depth, a track that isn’t level, or an operator paired with a gate that’s too heavy for it will all show up as problems months later. We’re gate specialists, not generalists, and our technicians have up to experience getting the mechanical and electrical side right the first time. We install manually operated swing and slide gates, full electric systems, and the openers that drive them. When a gate fails or gets stuck, we can often take care of a repair the same day. For a new installation we start with a free measure and a written price. Call (844) 834-1647 and we’ll put it on the schedule.
Automatic Gate Installation
Automatic Gate Installation is the full package: a new gate, an operator sized to it, safety devices, and the wiring that ties it together. You need it when an existing gate is too heavy or too worn for automation, when a manual gate has become a daily hassle, or when a property is being set up with controlled entry for the first time. We measure the opening, check the soil and the slope, and match the operator to the gate’s weight and travel, then handle the install and test every safety edge and reversing function before we hand it over. A typical automated swing gate installation in Paradise runs $3,200 to $7,500 estimated, depending on size, material and operator, with the written estimate setting the final price. We work with DoorKing and LiftMaster operators among others.
Measuring the Opening First
Nothing gets ordered until the opening is measured properly, including the pier spacing, the grade, and how much clearance the gate needs to swing or roll. Getting this right up front is what keeps the finished gate from dragging or binding. It also tells us which operator will actually carry the load.
Safety Devices as Standard
An automatic gate that closes on a person or a vehicle is a serious hazard, so photo eyes and reversing logic go in on every automatic install, not as an add-on. We test each device on site and show you how it behaves before we leave. This is the part generalists skip.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the whole job from the first measurement to the final test, whether that’s a small pedestrian gate or a vehicle entrance for a property manager’s site. Homeowners usually call us when an old gate has rusted through, when a new fence line needs a matching gate, or when an access point needs to be automated. Every tool and every part we carry is purpose-built for gates. We set the posts to proper footing depth for the load, hang the gate so it clears the ground through its full swing, and align latches and stops so nothing drags. Gate installation in Paradise typically runs $1,500 to $5,500 estimated for the gate and hardware, with automation priced separately and the written estimate fixing the final number. Free estimates, upfront pricing, and no work begins before you’ve agreed to the quote.
Manual and Swing Gate Setups
A manually operated swing gate needs good hinges, a solid latch, and posts that won’t lean under load. We set posts to proper footing depth, hang the gate with the right clearance, and check that it stays level through the full arc. It’s a simple job done properly, and that’s what keeps it working.

Matching an Existing Fence Line
When a gate has to sit in an existing fence run, we match the height and the material as closely as the run allows. The gate then looks like it belongs there instead of bolted on. We’ll tell you honestly where an exact match isn’t possible before you commit.

Electric Gate Installation
Electric Gate Installation brings a gate under power with an operator, a control board, and the access system you want, whether that’s a keypad, a remote, or a loop detector for vehicles. It makes sense when a gate gets used many times a day, when the entrance is a distance from the house, or when a property manager needs to control who comes through. Our technicians are trained on the control boards, loop detectors, and safety sensors that generalists routinely misdiagnose, so the wiring and the logic are right from day one. Electric gate installation in Paradise typically runs $2,800 to $6,800 estimated for the operator, controls and safety devices, with the written estimate setting the final price.
Control Board and Access Setup
The control board is the brain of the system, and the way it’s configured decides how the gate behaves. We set the travel limits, the timing, and the access inputs to match how you actually use the entrance. That’s the kind of detail a specialist gets right first time.
Power Runs and Loop Detectors
The power run to a driveway gate is often the part that decides the job’s cost and schedule, so we plan it before anything gets ordered. Vehicle loop detectors are cut in and tested so the gate holds open until a car has cleared. Both need proper planning, not guesswork.
Driveway Gate Installation
Driveway Gate Installation is the job of putting a new vehicle entrance gate across a drive, sized to the vehicles that actually use it and built to take the wear of daily opening and closing. You need it when a driveway is wide enough for a proper vehicle gate, when an old gate is too narrow or too light, or when a property is being secured for the first time. We measure the drive, check the slope and drainage, and confirm the gate clears the ground through its full swing before anything is built. Driveway gate installation in Paradise runs $2,500 to $6,500 estimated depending on width, material and whether it’s automated. The written estimate sets the final price, and you’ll see it before any work begins.
Slope and Drainage Matter
Desert ground moves with the seasons, and a gate that doesn’t account for that will drag or bind within a year. We check how the drive drains and where water runs before setting posts, so the gate clears the ground through its full swing. Getting this right up front saves a repair later.
Getting the Clearance Right
A driveway gate has to clear the ground through its entire swing, not just when it’s closed. We set the posts and the hinges so there’s no scrape, then test the full travel by hand before the operator is ever connected. If a gate drags, we fix it before we call the job done.
Sliding Gate Installation
Sliding Gate Installation puts a gate on a track or cantilever system so it rolls sideways along the fence line instead of swinging out into the drive. It suits a driveway where there’s no room for a swing, a steep approach, or a busy entrance where a swinging gate would be in the way. We check the track line, the grade, and the weight of the gate so the rollers and the operator are matched to the load. Sliding gate installation in Paradise typically runs $3,000 to $7,000 estimated depending on gate length, material and whether it’s cantilevered, with the written estimate fixing the final number.
Track vs. Cantilever Systems
A ground track is the simpler setup, but it needs a clear, level run and it collects grit over time. A cantilever gate carries its own weight and needs no ground track, which suits uneven ground. We’ll tell you which fits your site rather than pushing one.
Keeping the Gate on Its Line
Sliding gates come off the track when the rollers wear or the posts settle, and that’s a hazard on a heavy panel. We align the track and set the guide rollers so the gate stays on its line through the full run. That’s the part that keeps it safe.
Gate Opener Installation
Gate Opener Installation is fitting and setting up the motor and control system that drives a gate you already have, or one we’re installing with it. You need it when an existing gate is still sound but opening it by hand has become a chore, or when an old opener has failed and the gate itself is fine. We match the opener to the gate’s weight and travel, wire the controls safely, and test the reversing function before we finish. Opener installation in Paradise runs $1,400 to $3,500 estimated for the operator, controls and safety devices, with the written estimate setting the final price. We work with Mighty Mule and LiftMaster units among others.
Sizing the Operator to the Gate
An undersized opener on a heavy gate will fail early and may not reverse safely when it meets an obstruction. We weigh the gate and check its travel before recommending an operator. The right match is what makes the system last.
Testing the Safety Reverse
Every opener we install gets tested against an obstruction before we leave, and we show you how it should behave. A gate that fails to reverse is a serious hazard, and it needs a trained technician to check. If you’re unsure about yours, stop using the gate and call us.
Gate Fabrication
Gate Fabrication is building a gate to fit an opening that a stock gate won’t suit, whether that’s an unusual width, a specific style to match a fence, or a heavier frame for a site that gets a lot of traffic. It matters when the opening is out of the ordinary, when an existing gate has failed at the frame, or when a property manager needs a run of gates that match. We work out the frame and the infill, build it to suit the operator, and fit it on site. Fabricated gate work in Paradise typically runs $1,800 to $6,000 estimated depending on size, material and finish, with the written estimate setting the final price. Free estimates, and nothing is ordered before you’ve agreed to the quote.
Frame Design for the Operator
A gate built for automation needs a frame rigid enough to take the drive without flexing, and a place for the operator to mount. We design the frame around that from the start rather than adapting a gate afterward. That’s what keeps an automated gate running true.
Custom Widths and Styles
When a stock gate won’t fit an opening, we build to the actual measurement and match the style of the surrounding fence. Heavy panels that can crush need proper framing and hinges, so we don’t cut corners on the structure. It’s built to fit and built to last.
Brands We Service
We service LiftMaster operators and know where their control boards and limit switches tend to wear first, which is what makes a diagnosis quick. We also work on DoorKing systems, and we’re familiar with how their access control and loop wiring is set up on gated residential and commercial entrances. The same holds for Elite and Mighty Mule equipment, and for the full list: FAAC, BFT, Linear, Viking, and Ghost Controls. We work on the brand you already have, not the brand we prefer to sell.
That brand-agnostic approach means you’re never steered toward a system because it’s the one we happen to favor. The goal is the right installation for your site and your equipment. Whether you have DoorKing or any other make, we can help. Our technicians have up to experience installing and setting up gate operators, and we’re happy to talk through what a system needs before anything gets ordered.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- A gate that drags or binds on the ground. If a gate scrapes or sticks partway through its swing, the hinges or posts have moved and the load is landing wrong. It’ll get worse, and on an automated gate it puts strain on the operator.
- An operator that won’t reverse. If a closing gate doesn’t back off when it meets an obstruction, the safety devices have failed. Stop using the gate and have it checked by a trained technician; the safety caveat isn’t a small one.
- A sliding gate that’s jumped the track. A heavy panel off its line can come down or swing out where it shouldn’t. It needs to be reset by someone who knows the system.
- Loose posts or a leaning gate. Posts that lean or pull loose mean the footing isn’t holding, and the gate will keep moving off line. It’s an installation problem, and it gets fixed below ground.
- A gate with a failed control board. If a remote, keypad or loop detector has stopped working, or the gate runs on its own, the board needs diagnostic work. A gate specialist will find the fault; a generalist will guess.
Our Process, Step by Step
- 1
Free on-site estimate. We come out, measure the opening, look at the ground and the slope, and talk through what you want the gate to do. You get a written price before anything is ordered or started.
- 2
Sizing and system planning. We match the gate and the operator to the load and the run, and plan the power run and the access system. This is where the technical decisions get made.
- 3
Fabrication or ordering. If the gate needs building, we work out the frame and infill. If it’s a stock gate and an operator, we confirm the parts and set a date.
- 4
Install and wiring. Posts go to proper footing depth, the gate gets hung and aligned, and the controls and safety devices are wired in. Every tool on the job is there for gates.
- 5
Testing and handover. We test the travel, the reversing function, and every access point before we finish, then walk you through how the system behaves. The written estimate is the price; no surprises on the invoice.
How Much Does Gate Installation Cost in Paradise?
Most new gate installations in Paradise land somewhere between $1,500 and $7,500 estimated, depending on the type of gate and how much automation is involved. A typical manual swing gate installation in Paradise runs $1,500 to $3,500 estimated depending on width and material. A sliding gate with a track or cantilever system runs $3,000 to $7,000. When an operator and safety devices are added, the electric side typically runs $2,800 to $6,800 estimated on its own, and opener-only work on an existing gate is usually $1,400 to $3,500.
What affects the price: gate width and material, the weight the operator has to carry, whether the ground is level or sloped, the length of the power run, and whether the access system is a simple remote or something more involved.
How to avoid overpaying: get the opening measured properly before anything is ordered, match the operator to the gate rather than buying the biggest one, and get a written estimate that lists what’s included. The price is quoted and agreed before any work starts, so you know the number going in.
What a free estimate includes: an on-site measure, an assessment of the ground and the slope, a recommendation on gate and operator, and a written price for the job. Call (844) 834-1647 for an exact quote; estimates are free.
Our Service Area Near Paradise
We cover gate installation and repair across the Las Vegas Valley, including Paradise, Spring Valley, Enterprise, Henderson, Sunrise Manor, Las Vegas, and North Las Vegas. Travel across the valley is quick, and we book work into the next opening Sunday through Friday, 7am to 7pm. Same-day repair is often possible for gates that have failed. For new installation work we start with a free measure and a written estimate, then set a date that works for you.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Paradise
Gate installation is the job of putting a new gate and, if required, an operator and access system into an opening, set to proper footing depth and tested before handover. It covers measuring, setting posts, hanging or aligning the gate, and wiring the controls. We handle manual swing and slide gates, full electric systems, and opener-only work. Call (844) 834-1647 for a free estimate.
Most gate installations take between a day and a few days, depending on the gate and whether an operator is involved. A manual swing gate is usually the quickest, while a fabricated sliding gate with automation and a power run takes longer. We give you a clear timeline in the written estimate before anything is ordered. Call (844) 834-1647 and we’ll talk through what your job involves.
A typical gate installation in Paradise runs $1,500 to $7,500 estimated depending on the gate type, material and whether it’s automated. Opener-only work on an existing gate is usually $1,400 to $3,500. The written estimate sets the final price, and the price is quoted and agreed before any work starts. Call (844) 834-1647 for an exact quote; estimates are free.
Yes, we service LiftMaster and DoorKing equipment, along with FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We work on the brand you already have rather than steering you toward one we prefer. Our technicians are experienced with the control boards and access systems those brands use. Call (844) 834-1647 to book a visit.
Same-day repair is often possible for a gate that has failed, depending on the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 834-1647 and we’ll find you a slot.
Yes, we stand behind our installation work, and we’ll explain the warranty terms in writing with your estimate. The details depend on the gate, the operator and the manufacturer’s coverage on the parts. We walk you through what’s covered before you commit. Call (844) 834-1647 for the specifics.
Clear access to the opening and the driveway so we can measure and work, and have a rough idea of whether you want manual or automated operation. If an old gate is coming out, let us know about anything fixed to the posts or the ground. We handle the rest once we’ve done the on-site measure. Call (844) 834-1647 to get scheduled.
Schedule Your Gate Installation Service in Paradise Today
Ready to get a new gate in the ground and working properly? Call (844) 834-1647 for a free, no-obligation estimate on gate installation in Paradise. We’ll measure the opening, plan the system, and give you a written price before anything is ordered. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. From manual swing gates to full electric systems, our gate repair paradise specialists can help.
Written by the team at Gate Repair Paradise.