Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Paradise Homeowners
A gate that won’t open, won’t close, or drags across the driveway is a daily problem, not a someday problem. We fix gates in Paradise, and that’s all we do. Our technicians have up to experience on manual swing gates, iron and wood panels, sliding gates, and the electric operators that drive them. We work on the brand you already have, not the brand we prefer to sell, and we diagnose the actual fault before anyone quotes a repair. If your gate is down, call (844) 834-1647. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician to you the same day in most cases. Every price is written down and agreed before any work starts.
Driveway Gate Repair
Driveway Gate Repair is the work of getting the gate at the mouth of your property opening, closing, and latching the way it should again. You need it when a gate sags on its hinges, scrapes the ground, stops halfway, or leaves a gap a person could slip through. In Paradise, gates take a beating from intense summer sun and the fine desert dust that works into hinges, tracks, and rollers, so hardware loosens and pivots wear faster than most homeowners expect. We inspect the full assembly: posts, hinges, frame, latch, and the operator if there is one. We tell you what failed and why, then fix it. Typical driveway gate repair in Paradise runs $150-$450 depending on whether it’s hardware, alignment, or an operator fault, and the written estimate sets the final price.
Hinge and Post Repairs
A sagging gate usually points to a worn hinge or a post that has shifted in the soil. We check both before replacing anything, because a gate that only needs new hinges shouldn’t get a new post. Once we know which part has moved, we correct it so the gate swings level again.
Latch and Alignment Fixes
When a gate closes but won’t stay shut, the problem is almost always alignment rather than the latch itself. We adjust the gate to the post, then set the latch so it catches cleanly every time. That saves you from replacing hardware that was fine all along.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding
Gate Welding is the structural repair of cracks, broken welds, snapped hinge mounts, and bent frame sections on metal gates. You need it when a gate rattles, flexes, or you can see a hairline crack at a joint. Left alone, a cracked weld on a swing gate only gets worse, and a gate that fails at the hinge can come down completely. Our technicians weld on site where the gate allows, matching the repair to the material and the load it carries. Welding on a gate isn’t cosmetic work: a bad weld on a load-bearing joint is a safety problem, which is why we treat frame and hinge joints as structural, not patch jobs. Typical gate welding in Paradise runs $200-$550 depending on the size of the repair and whether the gate has to come off its hinges, with the written estimate setting the final price.
Cracked Frame and Joint Repair
We grind out the old weld, clean the metal, and weld the joint properly so the repair holds under the gate’s own weight. Cosmetic touch-up follows so the repair doesn’t stand out. We check the rest of the frame while we’re there, since one crack often means another joint is close behind.
Hinge and Bracket Reinforcement
Hinge mounts take the most stress on any swing gate, and that’s where metal gates fail first. We reinforce or replace the bracket and weld it back to solid metal. A gate that swings on a solid mount stops sagging and stops working its hinges loose.
Commercial Gate Repair
Commercial Gate Repair covers the gates that control vehicle and pedestrian access at gated communities, apartment complexes, and business sites in Paradise. You need it when an access gate fails, sticks, or stops responding to remotes and keypads, because every minute that gate is down disrupts residents, deliveries, and staff. Property managers call us because we specialize in gates rather than treating them as a side job. We work on the operator, the control board, the safety loops, and the physical gate itself, so a single visit can trace a fault from the keypad all the way to the motor. We know DoorKing and Elite access systems in particular and where those boards tend to fail. Typical commercial gate repair in Paradise runs $250-$800 depending on the system and the fault, quoted in writing before work begins.
Access Control and Entry Systems
When a gate ignores every remote but still opens from the interior switch, the problem sits in the access system, not the gate. We test the receiver, keypad, and loop detectors in sequence to isolate the failure. That keeps you from replacing a control board that was never the issue.
Scheduling Around Your Traffic
Gated communities and business sites can’t afford a gate propped open for hours. We plan commercial repairs around your busiest periods and tell you upfront how long the gate will be out of service. Clear timing means fewer complaints from residents and staff.
Iron Gate Repair
Iron Gate Repair is the work of restoring solid, heavy iron gates that have bent, seized, or come loose at the hinges. You need it when an iron gate binds, drags, or won’t swing freely, which often comes down to hinge wear or a frame that has twisted out of square. Iron is unforgiving: it doesn’t flex, so a bent section shows up as a gate that rubs the ground or catches on the post. We straighten what can be straightened, repair the pivot points, and check the frame for cracks that need welding. On gates with an operator, we confirm the drive arm and hinges are working together rather than fighting each other. Typical iron gate repair in Paradise runs $200-$500 depending on weight, damage, and whether welding is needed, with the final price set by the written estimate.
Straightening and Alignment
Iron gates that have taken an impact rarely bend in one place. We check the full frame for twist and bring the gate back to square so it swings without bind. An aligned gate puts far less strain on its hinges and operator.
Rust and Seized Pivot Treatment
Desert dust and dry heat still allow rust at exposed joints and pivot points, and a seized pivot will stop a heavy iron gate cold. We free the pivot, treat the corrosion, and get the gate moving again. That’s a much smaller job than replacing the hardware.
Sliding Gate Repair
Sliding Gate Repair is the work of getting a gate that rolls along a track to move smoothly and stop in the right place again. You need it when the gate jumps the track, grinds, moves in jerks, or comes off its rollers, which is a real safety concern on a heavy panel because a sliding gate that leaves the track can fall. The cause is usually in the track, the rollers, or the ground beneath the track shifting. We check all three, clear debris and obstructions, straighten or replace damaged track, and reset the rollers so the gate travels true. On powered sliding gates, we also confirm the operator and its limits are set correctly so the gate stops where it should. Typical sliding gate repair in Paradise runs $175-$500 depending on track and roller damage, with the written estimate setting the final price.
Track Straightening and Roller Replacement
A bent or dirt-packed track is the most common reason a sliding gate grinds or stalls. We straighten or replace the damaged section and fit fresh rollers that match the gate’s weight. The result is a gate that glides instead of lurching.
Operator Limit and Stop Adjustments
If the gate rolls freely by hand but the operator overshoots or reverses, the limits need setting. We adjust the operator’s travel so it opens fully and stops exactly at closed. That protects the gate from slamming into its end stops.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is the restoration work decorative iron gates need when ornamental sections loosen, crack, or separate from the frame. You need it when a scroll, picket, or decorative panel comes loose, a weld fails at a joint, or the gate starts to sag under its own weight. Wrought iron is often more decorative than structural, which means a loose section can look fine right up until it lets go, so we inspect the joins as carefully as the frame. We re-weld loose sections, repair the frame, and correct hinge and alignment problems that cause sagging. We respect the look of the gate: repairs are done to blend into the original design, not to stand out. Typical wrought iron gate repair in Paradise runs $200-$550 depending on the number of repairs and finish work required, with the final price set by the written estimate.
Decorative Section Repairs
Loose scrollwork and separated pickets get re-welded to the frame so the gate holds together and keeps its appearance. We match the repair to the existing work so it doesn’t read as a patch. On a decorative gate, structural integrity and appearance go together.
Finish and Touch-Up Work
Every weld on a wrought iron gate leaves a spot that needs finish work or it will rust. We clean the repair and apply a protective finish that matches the surrounding gate. That protects both the repair and the appearance of your gate.
Metal Gate Repair
Metal Gate Repair covers everything from steel driveway gates to aluminum frames that have bent, cracked, or come loose at the hinges. You need it when a metal gate binds, sags, or stops latching because the frame or hinges have moved. Metal gates in Paradise deal with intense summer heat and expansion, so joints that were tight can loosen over a season, and a gate that once latched cleanly starts to miss. We evaluate the material and the frame before deciding on the repair, and we tell you clearly whether a part can be repaired or needs replacing. Hinge and post alignment get checked alongside the frame, so we don’t fix one problem and leave another. Typical metal gate repair in Paradise runs $150-$500 depending on the type of metal, the damage, and any welding, with the written estimate setting the final price.
Frame, Post, and Hinge Assessment
Before any repair, we check the gate frame, the posts, and the hinges as one system. If a post has shifted, fixing the hinge alone won’t last. Finding the true source of the problem the first time saves you a second visit.
Repair or Replace Guidance
Not every metal gate is worth repairing, and we’ll tell you when a repair is the smarter call and when it isn’t. We explain the reasoning so you can decide with real information. You won’t get a replacement pitch for a gate a hinge adjustment would fix.
Wood Gate Repair
Wood Gate Repair is the work wooden gates need when boards split, slats warp, or the frame loosens from the hinges. You need it when a wood gate sags, sticks, or the joints at the stiles start to open, which in Paradise happens because dry heat and low humidity pull moisture out of wood and cause boards to shrink, split, and warp. A gate that fit perfectly a season ago can start binding at the latch as the wood moves. We repair the frame and joints, replace damaged boards, and rehang or realign the gate so it swings and latches cleanly again. We also check the posts, since a loose post is often what makes a wood gate sag in the first place. Typical wood gate repair in Paradise runs $150-$400 depending on the extent of the damage, with the written estimate setting the final price.
Board and Joint Repairs
Splintered boards and opening joints get repaired or replaced so the gate is solid again. We match the repair to the existing wood so it doesn’t look patched together. A gate that holds its shape also holds its hinges.
Rehang and Realign
When a wood gate sags, rehanging it on properly set hinges often fixes the problem. We adjust the gate to the post and confirm it latches without force. That’s the difference between a gate that works and one you have to lift to close.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We know the operator and control systems behind the gates we repair, because an electric gate fault almost always lives in the brand-specific parts. We work on LiftMaster operators and know where those units tend to fail at the control board and drive components. We also service FAAC systems, which are common on heavier swing and sliding gates, and BFT operators, where limit settings and board faults are frequent culprits. Our experience with Linear and Viking equipment covers diagnosis of the receiver, the controls, and the motor. We also handle DoorKing and Elite access systems on commercial and gated-community sites, where keypads, loop detectors, and entry controls tend to fail. On lighter residential gates we work on Mighty Mule and Ghost Controls units and know their wear points.
We’re brand-agnostic: we fix the system that’s already on your gate rather than steering you toward a brand we happen to carry. Whether you have LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule, or any other make, we can help. If you’re not sure what’s on your gate, we’ll identify it on the visit and explain what it needs.
Signs You Need a Pro Right Now
- The gate moves in jerks or grinds: A track, roller, or hinge has worn, and continuing to force it wears the parts further. Getting it looked at early keeps a small repair small.
- The gate won’t latch or leaves a gap: That’s an alignment or latch problem, and an open gate defeats the purpose of having one. We can usually correct it on the first visit.
- You see a crack at a weld or hinge mount: A structural joint is failing, and a gate that fails at the hinge can fall. This one shouldn’t wait; it’s a safety issue, not an annoyance.
- The gate jumps its track or comes off the rollers: On a sliding gate, a panel that leaves the track can tip, so stop using the gate and call. It’s the most serious symptom on this list.
- A loose post or a gate that’s sagging: The gate is telling you its support has moved. Left alone, the sag gets worse and takes the hinges with it.
Our Process, Step by Step
- 1
Call and describe the problem. Tell us the symptom and the gate type, and we’ll book a visit. A quick description helps us prepare so the first visit is usually the only one needed.
- 2
On-site diagnosis. We test the gate by hand, check the hinges, posts, track, and rollers, and on electric gates trace the fault through the operator, control board, and sensors. We diagnose before we quote.
- 3
Written estimate. We explain what failed and give you a written price for the repair. You approve it before any work starts, so there are no surprises on the invoice.
- 4
The repair. We carry out the fix with the right tools for a gate, whether that’s welding, hinge and track work, or operator diagnostics. We work on the brand you already have.
- 5
Test and review. We run the gate through full open and close cycles before we leave and show you what we did. If anything needs adjusting afterward, we’re a phone call away.
How Much Does Gate Repair Cost in Paradise?
Gate repair in Paradise typically runs $150-$800, and the price depends on what’s broken and how much work it takes to fix it. A typical driveway gate repair runs $150-$450 and covers hinge, latch, and alignment work. A typical metal or iron gate repair runs $150-$500, moving toward the top of that when welding is involved. Sliding gate repairs run $175-$500 depending on track and roller damage, and commercial gate repair runs $250-$800 because access systems and heavier operators take longer to diagnose. Overall, this work is usually well under what a full gate replacement costs, which is why we always try to repair before we recommend replacing.
What moves the price up: the gate type, whether welding is needed, whether the gate has to be taken down, and how many parts are worn. What moves it down: catching a problem early. A latch that misses costs less to fix than a frame that has been forced out of square for a season. That’s how you avoid overpaying – get it diagnosed before the damage spreads, and don’t let a general handyman guess at the operator.
Every estimate includes a full diagnosis, a clear explanation of the fault, and a written price for the repair. The estimate itself is free, the price is agreed before any work starts, and it’s set per job by that written estimate. Call (844) 834-1647 for an exact quote; estimates are free.
Our Service Area Near Paradise
Paradise sits right in the middle of the valley, so we’re close to the surrounding communities too. We handle Gate Repair Paradise and surrounding areas including Spring Valley, Enterprise, Henderson, Sunrise Manor, Las Vegas, and North Las Vegas. Most repairs in Paradise and the nearby towns are quick to schedule, and same-day service is common when you call early. Whether you’re in a gated community or a single-family home, the same gate specialists handle the work. Want a related service? See our gate repair and gate repair pages.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Paradise
Gate repair is the work of diagnosing and fixing whatever is causing a gate to fail to open, close, swing, slide, or latch properly. It covers the gate itself, its hinges and posts, its track and rollers, and its electric operator if it has one. We diagnose the cause first and fix the specific fault rather than replacing parts on a guess. If you’re not sure what’s wrong, call (844) 834-1647 and we’ll figure it out on the visit.
Most gate repairs are finished on the same visit, in anywhere from an hour to a few hours depending on the fault. A hinge adjustment or latch fix is quick; welding and track repair take longer. On a first visit we diagnose, give you a written price, and complete the repair once you approve it. Complex operator faults may need a follow-up if a part is required. Call (844) 834-1647 to get an exact answer for your gate.
Gate repair in Paradise has a typical range of $150-$800, depending on the type of gate and the damage. Driveway and metal or iron gate repairs usually land in the $150-$500 range, sliding gate repairs around $175-$500, and commercial gate repair runs $250-$800. The written estimate sets your final price, and it’s agreed before any work starts. Call (844) 834-1647 for an exact quote; estimates are free.
Likely yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, plus other makes. We’re brand-agnostic, so we fix the system on your gate rather than pushing a brand. If you don’t know the make, we’ll identify it on the visit. Call (844) 834-1647 and tell us what you have.
Same-day service is common when you call early, especially for Paradise and nearby areas. We answer 24/7, and fast dispatch runs 7am to 7pm. A call outside dispatch hours is booked into the next opening. For same-day gate repair in Paradise, call (844) 834-1647.
We stand behind the repairs we make and will explain the terms in person when we give you the written estimate. Terms depend on the type of repair and the parts involved, so we spell them out rather than hiding them in fine print. Ask about it on the visit and we’ll cover it clearly. Call (844) 834-1647 with questions before you book.
Make sure we can get to the gate and, on electric gates, that the power to the operator is on so we can test it. Clear any vehicles or obstacles from the gate’s swing or travel path. If you know the operator brand, have it handy. Then just tell us the symptom – what happens when you try to open or close it. Call (844) 834-1647 to schedule.
Schedule Your Gate Repair Service in Paradise Today
Don’t let a dragging gate or a dead operator run your day any longer. Gate specialists, not generalists: call (844) 834-1647 for gate repair in Paradise. We answer 24/7, fast dispatch runs 7am to 7pm, and same-day service is common when you call early. You’ll get a no-obligation, free estimate, a written price agreed before any work starts, and a gate that works again. Nine brands. One specialty. Your gate fixed.
Written by the team at Gate Repair Paradise.