Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Las Vegas, NV
Gate Installation in Las Vegas is a different job than it is almost anywhere else in the country. The valley’s west and northwest sides are built out of HOA-governed master-planned communities, and the gates standing in those driveways have to match an approved design before they can even be ordered. Add weeks of 110°F-plus heat and relentless desert UV, and a gate here is fighting the sun from the day it goes up. We’re a gate-only company, and we work on the brand you already have rather than the brand we’d prefer to sell. Call (844) 834-1647. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Las Vegas Homes Are Different
Drive through Summerlin, Centennial Hills, Providence or Aliante and you’re looking at stucco-and-tile homes built mostly between the 1990s and the 2010s, sitting on paver driveways with gates that were either builder-installed or added aftermarket. Those gates are governed. Architectural review committees check them for uniformity, which means a repair often has to match a specific approved finish, style and color, not just swing open and closed again. That’s a constraint a general contractor will miss and a gate specialist plans around.
The climate does the rest. West-facing and south-facing gate faces bake in UV that fades and chalks powder coat years before the shaded side shows any wear. Operator control boxes mounted on that sun-baked side run hotter than they should and trip on overload. Lubricants dry out, welds on iron gates crack at the joints, and monsoon dust and windstorms leave debris that jams tracks and bends lighter gate panels. Older central neighborhoods like 89108 and 89130 still carry 1970s and 1980s wood and chain-link gates that sag with age. We check the sun-facing side first on every call in Las Vegas.
Key Takeaways
- Many Las Vegas driveway gates in the west and northwest valley must meet HOA architectural review standards, so repairs often need an approved finish, style and color.
- Desert heat and UV drive the recurring calls here: sun-facing weld failures, faded powder coat and heat-stressed operator motors.
- We service nine gate and operator brands, not one or two.
- Estimates are free, and the price is quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Las Vegas Services
Las Vegas homeowners and property managers call us about two things more than anything else: fixing a gate that’s already failing, and getting a new one installed correctly the first time.
Gate Repair in Las Vegas
Most of the manual gate work here is the sun’s fault. Iron gates develop cracks at the welds on the face that points west or south, hinges wear unevenly because one side of the gate takes more heat, and wood gates in older central neighborhoods sag until they drag on the pavers. When we look at a gate, we check the sun-facing side first, because that’s where the failure usually started. If you need Gate Repair in Las Vegas, we diagnose the actual cause before we touch a tool, which means you don’t pay twice for the same problem.

Electric Gate Repair in Las Vegas
Heat is the enemy of gate operators in the valley. A control box mounted in full afternoon sun runs hotter than its rating allows, and the board starts cutting out, the motor trips on overload, or the gate reverses for no obvious reason. Safety loops get damaged by paver movement and monsoon debris, and remotes stop pairing when the receiver overheats. We’re trained on the control boards, loop detectors and safety sensors that generalists routinely misdiagnose, and we carry parts for the brands we service. If your Electric Gate Repair in Las Vegas call keeps coming back to the same fault, we find out why.

Gate Installation in Las Vegas
Gate installation in Las Vegas means matching an HOA-approved design, then building a gate that survives decades of desert sun rather than a coastal climate. In Summerlin, Centennial Hills and the rest of the west and northwest valley, most driveways are paver, most gates are decorative iron or vinyl, and most of them were added aftermarket rather than by the builder. The problem we solve is simple: a gate that satisfies the architectural review committee and still runs reliably through weeks above 110°F. That’s where Gate Installation starts, and it’s why we measure on site and put the price in writing before anything is ordered.
Automatic Gate Installation
A builder-grade gate with no automation, or an old operator that’s given up after too many Las Vegas summers, is usually the reason people call for this.
Signs you need it
You’re parking to open the gate by hand, or an existing operator has failed and the repair quote approaches the cost of replacement.
What it costs in Las Vegas
Automatic gate installation typically runs $3,200 to $7,500, depending on gate size, operator model and whether the power run has to be extended.
How we do it
We measure the opening, confirm the gate swings or slides freely, set the operator to the manufacturer’s spec, wire and test the safety edges and loop detector, and walk you through the remotes before we leave.
Driveway Gate Installation
Paver driveways are the norm in the master-planned west-side communities, and they change how posts get set and how an operator gets mounted.
Signs you need it
The driveway has no gate yet, or the existing one is sagging, mismatched to the HOA standard, or narrow enough that it’s a nuisance to pull through.
What it costs in Las Vegas
Driveway gate installation typically runs $2,800 to $6,800, based on width, material and whether the gate is manual or automated.
How we do it
We set posts to proper footing depth, hang the gate so it clears the pavers through the full swing, align the latch and stops, and finish with a function test in front of you.
What Gate Installation Costs in Las Vegas
| Item | Typical range in Las Vegas |
|---|---|
| Automatic gate installation | $3,200 – $7,500 |
| Driveway gate installation | $2,800 – $6,800 |
| Sliding gate installation | $3,000 – $7,200 |
These are estimates for the typical range in Las Vegas, and the written estimate sets the final price.
Do I need HOA approval before a new gate goes in?
Yes, in most west and northwest valley master-planned communities. Architectural review committees check color, style and finish for uniformity, so get written approval before you order. We measure and quote in writing so your submittal has real numbers in it.
Can you install a gate that matches my existing HOA-approved style?
Usually, yes. We work from the approved design and match finish, color and proportions to your community standard. Measure and installation are scheduled, not same-day, because materials are ordered to the approved spec. Call (844) 834-1647 for a free estimate.
Brands We Service in Las Vegas
We work on equipment from nine gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. We don’t claim to keep every part on hand, and we won’t guess at a board. See our brands for the full picture. Most residential turnaround is quick because we know the system before we arrive.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Las Vegas, NV
| Service | Typical range in Las Vegas |
|---|---|
| Automatic gate installation | $3,200 – $7,500 |
| Driveway gate installation | $2,800 – $6,800 |
| Sliding gate installation | $3,000 – $7,200 |
| Manual swing gate repair | $150 – $450 |
| Gate hinge and latch repair | $120 – $350 |
| Operator motor replacement | $450 – $1,200 |
| Control board diagnosis and repair | $180 – $600 |
| Safety loop and sensor repair | $200 – $650 |
| Remote and receiver repair | $90 – $275 |
In Las Vegas, price goes up with gate width, HOA-mandated decorative iron patterns that take more labor to match, and whether the operator’s power run needs extending. Every price here is an estimate, and the written estimate sets the final figure. We quote and agree the price with you before any work starts.
Neighborhoods We Serve in Las Vegas
We cover the master-planned west and northwest valley along with the older central neighborhoods, where the housing stock and the gate problems look nothing alike. Summerlin, Centennial Hills and Providence mean stucco-and-tile homes with paver driveways and architectural review standards; the central areas mean 1970s and 1980s gates that sag with age and heat. Aliante and the northwest get the same sun exposure and the same overloaded operators. We schedule arrival windows across the metro, and for most repair calls we can get a technician to you the same day when the schedule allows.
- Summerlin
- Centennial Hills
- Providence
- Aliante
- 89108
Service Area – Cities Near Las Vegas
The same heat and the same HOA-governed housing patterns run well beyond the city line, so our service area reaches into the surrounding communities. We work in North Las Vegas, NV, where newer master-planned tracts carry many of the same gate styles, and in Sunrise Manor, NV on the east side. We also cover Paradise, NV for both residential driveways and gated commercial sites, and Spring Valley, NV to the west. If you’re just outside these, call and we’ll tell you straight whether we can reach you.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Las Vegas
Often, yes, for repair calls. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. Installation work is measured and ordered first, so it’s scheduled rather than same-day. Call (844) 834-1647 and we’ll give you an honest arrival window.
It depends on the gate and the site. Most cities require a permit for structural work and for anything involving the power run, and HOA approval is a separate step in master-planned communities. Ask the city’s building department, and we’ll help you understand what the job involves.
We serve the west and northwest valley, the central neighborhoods and the surrounding metro, from Summerlin and Centennial Hills through to the east side. If your property sits outside the usual footprint, call and we’ll confirm coverage rather than leave you guessing. Estimates are free.
Whether your gate needs a hinge, a control board or a whole new install, we diagnose it right the first time. Call (844) 834-1647 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Gate specialists, not generalists – that’s the whole company.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Las Vegas Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Dale Brooks"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Dev Rao"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Jennifer Parker