Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Henderson
If your driveway gate has stopped opening, is reversing halfway, or is buzzing instead of moving, you’re in the right place. We’re gate specialists serving Henderson from Paradise, and every technician, tool and part we use is purpose-built for gates – not shared with fencing or garage-door work. Whether you’re in Green Valley, Seven Hills or out toward Lake Las Vegas, you’re dealing with one of the hottest gate environments in the country, and that shapes how we diagnose the problem. Our technicians have up to experience on LiftMaster, FAAC, DoorKing and other major systems. Call (844) 834-1647. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Henderson Homeowners Call Gate Repair Paradise for Electric Gate Repair
We work on the brand you already have – not the brand we prefer to sell. That matters in Henderson, where a gate can carry an older FAAC operator, a builder-installed LiftMaster unit, or an Elite system that’s done its job through twenty summers. Because we specialize in gates only, our diagnostics don’t stop at the motor; we read the control board, trace the safety loops, and check the physical gate before recommending any part. That’s the difference between a fix and a guess.
Henderson homeowners and property managers call us because the surrounding trades are generalists. A fence company that also hangs gates may carry one operator brand and be tempted to sell you what’s on hand. We service nine brands and diagnose each situation on its own terms. Same-day service is available across Henderson when you call before the day fills up, and our free estimate means you’ll know the price before we touch the gate. We’re not the only gate company in the valley, but we’re a gate-only company – and in a city with this much heat, that experience shows. Call (844) 834-1647 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Opener Repair in Henderson
Gate Opener Repair in Henderson most often starts with a motor that’s overheated under sustained 110°F+ summer load, or an operator that was asked to do more than it was built for. When a builder-grade unit gets bolted to what was a manual gate, it’s pushing hinges that soften in the heat and a panel sized for hand-push. That combination is what makes an opener stall mid-travel, reverse for no apparent reason, or trip a breaker on a hot afternoon. A typical gate motor repair runs $185 – $380 depending on the part, and we’ll quote before work starts.
Motor and Control Board Diagnostics
Technicians read the control board before touching the motor. Fault codes point to travel limits, current sensing on a dragging gate, or a board damaged by heat and dust. We carry replacement boards for several of the nine brands we service and can often complete the repair in one visit.
Travel Limits and Sensitivity Recalibration
An operator that reverses without an obstruction is usually being told to stop by excessive load sensing. Recalibrating travel limits and sensitivity after correcting alignment is often the whole repair. If the gate itself is dragging, the opener can’t be fixed with a setting.
Automatic Gate Repair in Henderson
Automatic Gate Repair in Henderson has two distinct faces, and knowing which one you’re looking at saves money. In newer subdivisions like Inspirada and Anthem, the recurring problem is a builder-grade operator that was never given proper power at the hinge post. In older Green Valley, the problem is usually physical – caliche-set shallow footings that have heaved, sagging gates, and hinges that took the strain for years. A typical automatic gate repair involving opener replacement and alignment runs $350 – $850, and we set the final price in writing before work starts.
Power and Conduit for the Hinge Post
An automatic gate that keeps tripping its breaker may be fighting a supply that was never designed for an operator. We verify what power and conduit exist at the hinge post before we assume the opener is the fault. Where there’s no dedicated run, we explain what’s needed and quote the job accordingly.
Swing Alignment and Post Footing Checks
A dragging swing gate that appears to have an operator problem often has a post problem. Caliche-heavy soil shifts with heat and winter chill, and a post set shallow can lift and tilt. Checking alignment and footing before replacing the operator is how we avoid a fix that fails again.
Trusted Brands We Service in Henderson
We work confidently across DoorKing, LiftMaster, Elite, FAAC, BFT, Linear, Viking, Ghost Controls and Mighty Mule. If your system isn’t one of those, tell us what you have – the diagnosis is the same. We don’t claim to stock parts across every brand, but our gate-only focus means we know these systems properly and typically source the right part faster than a generalist. A Henderson gate can be a DoorKing for a commercial entrance or a Mighty Mule on a residential drive, and both are jobs we handle. Call (844) 834-1647 with your model.
Common Electric Gate Repair Problems We See in Henderson Homes
- Builder-grade operator on a manual gate. Newer builds often get their gate automated after handover with no conduit or 120V at the hinge post, so the opener works harder than designed. Under 110°F+ afternoons, that shows up as stalling or a tripped breaker.
- Heat-softened hinges and sagging gates. Low humidity preserves metal but bakes lubricants and seals, while sun-exposed hinges soften and lose alignment. Reports of a gate that drags usually trace back to post footing or hinge wear.
- UV-cracked finishes and warped wood or vinyl panels. Henderson’s intense sun degrades vinyl and warps wood more than moisture ever would. Mechanical function can be fine while the panel itself is failing.
- Monsoon dust and wind loosening hardware. Seasonal storms knock swing alignment out of true and coat safety sensors. A gate that reverses without obstruction after a dust event is often a sensor-cleaning job.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Henderson, NV
We keep pricing straightforward. A gate motor repair in Henderson typically runs $185 – $380. Remote or keypad repair usually falls in the $95 – $220 range. Safety sensor and loop repairs tend to run $120 – $280. Replacing a builder-grade operator and correcting alignment on a previously manual gate typically costs $350 – $850, and where no power or conduit exists at the hinge post, that’s priced separately after we look at the site. Nothing starts until you’ve agreed to the written estimate. The estimate is free, and the number we agree on is the number you’ll pay. Call (844) 834-1647 for yours.
We Also Serve Cities Near Henderson
We also cover the surrounding valley, including Paradise, Enterprise, Sunrise Manor and Spring Valley. If you’re on the edge of Henderson and not sure whether you’re in our area, call and we’ll tell you. Our electric gate repair service handles the same heat and soil conditions across the metro. Wherever you are, the same rule applies – free estimate, agreed price, then work. Call (844) 834-1647 and we’ll confirm your address.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Henderson
Expect a site check for power and conduit at the hinge post before anything else, because most builder-installed manual gates in Henderson came without either. If no dedicated run exists, that work has to be planned and quoted before the operator goes in. Automated retrofits are scheduled, not same-day, and we give you a free written estimate first. Call (844) 834-1647 to book yours.
Heat causes it in two ways: the operator loses efficiency under 110°F+ load, and heat-softened hinges make the gate harder to push than when it was set up. An undersized builder-grade operator installed on a gate with no proper power run is the most common setup we find. Diagnosing which of the two is causing the stall is the first step, and a free estimate tells you what the fix costs. Call (844) 834-1647.
Your gate should have functioning safety sensors, and we treat them as non-negotiable. Automatic gates carry real crush risk, and modern operators are built to accept photocells, loops or safety edges. We check that the sensors actually trip, not just that they’re present. If your gate is missing them, ask us what’s needed. Call (844) 834-1647.
It’s usually the post footing in older Henderson neighborhoods, where shallow-set posts in caliche-heavy soil heave with heat and winter chill. Hinges wear too, and swapping the operator won’t fix either. We check footing and alignment before touching the motor. Call (844) 834-1647 for a free estimate.
Yes – many of Henderson’s planned communities regulate gate height, style and color, so a repair may need to match the approved design. We work with the gate in front of us and can talk through what your HOA will expect. Getting the design right the first time saves a second visit. Call (844) 834-1647.
Call Gate Repair Paradise for Electric Gate Repair in Henderson
If your gate isn’t working the way it should, call us. We’re a gate-only company, we diagnose the whole system – power, footing, alignment, operator – and we quote before anything starts. Call (844) 834-1647 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Paradise.